Overview
The SmartByte LT-IS6018G-2GX16GT is the highly reliable industrial Ethernet switch with 16-port 10/100/1000-TRJ45 and 2-port 1000Base-XSFP slots. It is featuring with link aggregation, flow control, QoS(1-2 ports) and broadcast storm restrain function, which all can be configured by the Dip switch on the top panel.
LT-IS6018G-2GX16GT is also a high cost-effective easy-to-use device, which provides essential industrial Ethernet networking function, including wide range power input 12-58VDC, redundant power design with polarity reverse/over-voltage/over-current protection, robust IP40 fan-less housing with Din-rail installation, wide operation temperature from -40°C to 75°C as well as high-level EMI/EMC capability.It is thebest choice for heavy industrial factory, transportation, oil & gas, chemical, IP Surveillance and processing automation area where environmental conditions are harsh and critical.
Features
➢ 16*10/100/1000Base-T RJ45 ports, 2*1000Base-X SFP slots
➢ Redundant power DC12-58V input with polarity reverse/over-voltage/over-current protection
➢ Support one channel output relay alarm(terminal block Pin 5/6) for DC power failure
➢ Support powerful Dip switch function:
1.Link aggregation; 2. Flow control; 3. QoS(1-2 ports) ; 4.Broadcast storm restrain
➢ Support 10K Bytes Jumbo frame
➢ Support6KV surge protection and ESD: Air-15kV, Contact-8kV Protection
➢ IP40 fan-less andDin-rail hardware design
➢ Operation temperature:-40 ℃ ~+75℃
Model No. |
LT-IS6018G-2GX16GT |
|
Interface |
Fiber ports |
Copper RJ45 ports |
2 |
16 |
|
Ethernet |
16*10/100/1000Base-T 2*1000Base-X |
|
Alarm port |
One relay output for power failure. Alarm relay current carry ability: 1A@24VDC |
|
Standard |
IEEE 802.310Base-TEthernet IEEE 802.3u Fast Ethernet IEEE 802.3ab Gigabit Ethernet IEEE 802.3x Full-Duplex Flow Control IEEE 802.3az Energy Efficient Ethernet |
|
Dip Switch |
1. Link aggregation 2. Flow control 3. QoS(1-2 ports) 4. Broadcast storm restrain |
|
LED Indicators |
||
P(Power indicator) Green |
Off: the device is power off or failed |
|
On: the device power on is normal |
||
S(System indicator) Red |
Off:thechip is normal |
|
On:the chip read/write is unnormal |
||
1-16 (Copper ports) |
Green indicators |
Yellowindicators |
Off: ports link down |
Off:port on 10/100M |
|
On: ports link up |
On:port on 1000M |
|
Blinking: data on TX/RX |
|
|
17-18 (Fiber ports)Green |
Off: ports link down |
|
On: ports link up |
||
Blinking: data on TX/RX |
||
Power parameters |
||
Input voltage |
12-58VDC, redundant power input |
|
Input current |
0.8A Max |
|
Total power consumption |
Full loading≤10W |
|
Connector |
Removable6-pin terminal block, Pin 5/6 for relay alarm output |
|
Reverse polarity protection |
Support |
|
Over-voltage protection |
Support |
|
Over-current protection |
Support |
|
Switching features |
||
Switching capacity |
36G |
|
Packet forwarding rate |
53.5Mpps |
|
MAC address table |
8K |
|
VLAN |
4K |
|
Buffer |
2M |
|
Forwarding delay |
<5us |
|
Jumbo Frame |
Support 10Kbytes |
|
MDX/MIDX |
Support |
|
Watchdog |
Support |
|
Network Topology |
||
Star topology |
Support |
|
Bus topology |
Support |
|
Tree Topology |
Support |
|
Mechanical structure |
||
Case protection |
IP40 |
|
Installation method |
Din-rail |
|
Dimension(W*D*H)mm |
54*115*158mm |
|
Weight |
1.41Kg |
|
Operating environment |
||
Operating temperature |
-40℃~+75℃ |
|
Storage/transportation temperature |
-40℃~+85℃ |
|
Relative humidity |
5%~95%(non-condensing) |
|
Industry standard |
EMI:FCC Part 15B Class A |
|
Surge protection of power: IEC 61000-4-5 6KV/4KV(8/20us) |
||
Surge protection of Ethernet ports:IEC 61000-4-5 6KV/2KV(10/700us) |
||
RS: IEC 61000-4-3 80 MHz-1 GHz:10 V/m |
||
EFT: IEC 61000-4-4 power interface: 4K;Ethernet ports: 2K |
||
CS: IEC 61000-4-6 10V |
||
ESD: IEC 61000-4-2 Level 4(8K/15K) |
||
Shock: IEC 60068-2-27 |
||
Free fall: IEC 60068-2-32 |
||
Vibration: IEC 60068-2-6 |
||
Certification |
CCC/CE/FCC/RoHS |
|
Warranty |
5 years |
Model |
Description |
LT-IS6018G-2GX16GT |
Industrial Ethernet switch with 16*10/100/1000Base-T RJ45 ports and 2*1000Base-XSFP slots, DC12-58V input, redundant dual power supply, Din-rail installation. Operation temperature: -40℃~+75℃ |